DCC Mobile Decoders

Equip your fleet with DCC without breaking the bank! SoundTraxx DCC Mobile Decoders provide high-performance operation and 14 Hyperlight lighting effects in a variety of easy-to-use formats for models that do not exceed a 1-amp stall current.

In addition to offering a selection of 14 Hyperlight lighting effects, options include a choice of directional or Rule 17 lighting control, grade-crossing timers, adjustable flash rate, and an LED brightness correction control mode.

The SoundTraxx Hyperdrive Motion Control System, incorporates advanced motor control features such as high-resolution speed steps and high-frequency PWM drive (pulse-width-modulation) to help eliminate motor ‘hum.' Hyperdrive also includes such features as programmable speed curves and adjustable momentum.


P.N. Description
851001 MC1Z102P6
MC1Z102P6 Mobile Decoder

Z/N-scale, 2-function decoder that is available with a 6-pin NEM651 connector popular in many European models. This decoder will operate in DCC only.
Measurse: 13 x 9 x 3mm.

851002 MC1Z102SQ
MC1Z102SQ Mobile Decoder

Z/N-scale, 2-function decoder with an attached wire harness, or ‘squid cable,' for easy installation in some Z and most N-scale models. This decoder will operate in DCC only.
Measurse: 13 x 9 x 3mm.

852001 MC1H102P8
MC1H102P8 Mobile Decoder

HO-scale, 2-function decoder in a plug-and-play format suitable for use with a variety of models. It is manufactured with an NMRA compatible 8-pin ‘direct-plug.' This decoder will operate in DCC only.
Measurse: 17 x 17 x 7mm.

852002 MC2H104AT
MC2H104AT Mobile Decoder

HO-scale, 4-function decoder designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both DC and DCC.
Measurse: 74 x 17 x 3mm.

852003 MC2H104OP
MC2H104OP Mobile Decoder

HO-scale, 4-function decoder with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket. This decoder will operate in both DC and DCC.
Measurse: 25 x 16 x 6mm.

852004 MC2H104P9
MC2H104P9 Mobile Decoder

HO-scale, 4-function decoder with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models. This decoder will operate in both DC and DCC.
Measurse: 25 x 16 x 6mm.

*All formats are compatible with NMRA DCC Standards & Recommended Practices, and are manufactured in Durango, CO.